Search PCOTEC Products

​Curing agents determine the crosslinking speed and melt viscosity during the curing stage. If the reactivity is too fast, the coating may gel prematurely, causing orange peel or poor leveling. If too slow, the film may sag or show surface defects.

Absolutely. We provide recommended stoichiometric ratios, reaction-kinetics support, and resin–curing-agent matching to ensure stable processing at your target line speed and oven temperature.

Curing-agent structure directly influences thermal stability and UV performance. We design and select curing agents with optimized crosslink architecture to minimize yellowing and improve outdoor durability.

Yes. We offer curing agents with different activation energies, allowing formulations to cure at conventional 180–200°C or energy-saving 140–160°C depending on application needs.

Our team can evaluate curing-agent reactivity, resin compatibility, cure-window design, and oven parameters to optimize the formulation and ensure full crosslinking.

We control purity, particle size, and reaction-endpoint parameters during synthesis, and test each batch for reactivity index to ensure predictable curing behavior in TGIC and HAA systems.