Search PCOTEC Products

The main downsides of powder coating include the need for oven curing, restrictions on heat-sensitive substrates, difficulty producing very thin films, downtime during color changes and limited options for repairing installed products.

TGIC powder coatings vs. non-TGIC powder coatings is an important comparison for manufacturers developing exterior polyester finishes.

Neither plastic nor polyester is automatically better because polyester is itself a family of polymers that can be used as plastic, fiber, film, liquid resin, or powder-coating binder.

Polyester resin may be called polyester binder, saturated polyester resin, carboxyl-functional polyester resin, powder-coating polyester, unsaturated polyester resin, fiberglass resin, or laminating resin.

Polyester resin is used in powder coatings, fiberglass composites, artificial stone, cast products, adhesives, electrical insulation, textiles, packaging, and molded components.

Polyester resin is a synthetic polymer formed by reacting polyols with dicarboxylic acids or related acid components. In powder coatings, it functions as the main film-forming binder and controls important properties such as flow, gloss, flexibility, hardness, weather resistance, chemical resistance, and curing behavior.

Epoxy resin can stick to some plastics, but adhesion varies greatly by plastic type, surface energy, contamination, flexibility, and preparation.

Epoxy resin does have a shelf life, but reaching the printed date does not always mean the material suddenly becomes unusable on that day.

Cleaning epoxy resin correctly begins with one question: is the material uncured residue, cured contamination, sanding dust, or a normal finished epoxy surface?

Epoxy resin may become touch-dry within several hours, but complete curing often takes much longer. The exact time cannot be determined from the word “epoxy” alone because different resin and hardener systems have different reaction speeds.

Polishing epoxy resin is the process of refining a cured surface until scratches, cloudiness, and sanding marks are reduced. The result may range from a smooth satin finish to a high-gloss reflective surface.

Removing epoxy resin depends mainly on whether the material is still liquid, partly cured, or fully hardened. Fresh epoxy can often be collected before it bonds completely, while cured epoxy usually requires controlled mechanical removal.